A caulking gun is a device used to seal cracks and gaps. Caulk is made of latex or silicon which is used for sealing a variety of materials like ceramic, glass, and wood. Caulk is contained in a tube. The caulking gun holds the tube and regulates the amount of caulk to be released at a time and also exactly where it should be released.
Also Read: Best Compound Miter Saw
Our Top Four Best Caulking Guns
1. DEWALT DC545K Review
This advanced caulking gun is efficient and perfect for heavy-duty sealant or caulking jobs. The DEWALT DC545K is a battery powered gun used mainly by professionals. It can efficiently handle adhesives that are very thick without clogging. It applies around 640-pounds of force to consistently push out the adhesives or sealants from the tube. It can dispense adhesives or sealants of the highest viscosity.
Features:
Rotatable cartridge – The cartridge holder rotates 360-degree and consistently pushes out adhesives that are otherwise difficult to push out. It applies 650lbs force to push out every bit of the adhesive from the tube. The cartridge holder can hold 10 ounces and about 300 to 310 ml of cartridges.
Auto-reverse function – The device has an auto-reverse feature to avoid any wastage or dripping of the adhesives from the gun.
Speed control – This device has a variable speed feature that allows you to control the speed. It is very precise. Just set the speed, and it will consistently control the flow rates and also control the bead.
Things We Liked:
- The auto-reverse function avoids any wastage or drips
- Variable speed feature controls the speed and flow rates
- 650 lbs force pushes out every bit of sealants or adhesives from the tube
- The cartridge rotates 360-degree
- Perfect for heavy-duty sealant jobs
Things We Didn’t Like:
- It is quite heavy to handle
2. Newborn 250 Review
The Newborn 250 is a smooth steel rod that has a revolving frame. It can fit 1/10 gal of the cartridge and has a thrust ratio of 18:1. This is a device you can trust, and it will not fail you. If the device is not for regular use and you rarely need them, then this is a perfect choice. Some devices may not work if it is put away for a while; however, this one works just fine. It has a comfortable grip that allows you to work longer with the device without making any mistakes with caulking. It distributes the caulk evenly and also maintains the pressure consistently when you’re dispensing the caulk from the tube.
Features:
Revolving frame – It has a revolving steel frame that rotates the cartridge to maintain the bead orientation especially when caulking, near the corners.
Corrosion resistant – The frame of the device is made of zinc alloy which makes the device corrosion resistant.
Smooth to use – This device can be used with adhesives, cement, asphalt, acrylic, and butyl as it gives a thrust of 18:1 ratio.
Things We Liked:
- Build of zinc alloy; it is corrosion resistant
- The pressure rod is smooth and doesn’t require much force
- It has a revolving frame and can fit cartridges of 1/10 gal
- A thrust ratio of 18:1 for smooth use with heavy adhesives and sealants
- It maintains consistent pressure and even distribution
- The gun works with any type of caulk
Things We Didn’t Like:
- It is not dripless
3. Chicago CP9885 Review
Chicago CP9885 caulking gun is one of the best Pneumatic Gun. This gun saves time as it is easy to operate. It is ideal to be used on glass, composite, wood, plastic and even rubber. The cartridge capacity is 2 inches x 8-1/2 inches (which is 50 x 210mm). It is durable and lightweight. It is ideal for heavy-duty jobs. It is an air-powered gun and weighs 2.32 pounds.
Features:
Controlled trigger – The device has a controlled trigger that works when pulled and stops working when released. This ensures no dripping and messy goop.
Consistent bead – From the first joint till the last, the bead remains consistent as the pressure delivered is pneumatically.
For heavy use – The pneumatic air gun is the solution if you have to do a huge amount of caulking. It can complete the job in much lesser time than a manual device.
Things We Liked:
- Pneumatic guns allow consistent even beads
- The controlled trigger that maintains the flow of material
- Light in weight
- Fast and easy to operate
Things We Didn’t Like:
- It takes time to regulate the flow
- Components can wear out over time
- It’s too powerful to control
4. Newborn 930-GTD Review
The Newborn 930 GTD is a smooth rod caulking gun that is drip-free. It has the capacity to fit 1/10 gal of cartridges. The thrust is a 10:1 ratio which can be used with materials of low viscosity like latex. It works consistently with different types of caulks.
Features:
Anti-drip – It is built with an anti-drip feature. The pressure is removed from the adhesive or sealant tube after the trigger is pulled each time and the rod pulls back to avoid drips.
Easy and smooth to operate – The pressure rod is quite smooth and doesn’t require much force. Also, this makes a lesser sound than a ratchet-style rod.
Comfortable grip – The handle, as well as the trigger, is padded. It has a thermoplastic grip for comfort.
Things We Liked:
- It is user-friendly
- It is designed as anti-drip
- It is smooth to operate
- It has an Ergonomic handle for a smooth grip
- It is steady and dispenses consistent beads
- Included with ladder hook
- The whole frame of the gun is made of steel half-barrel
Things We Didn’t Like:
-
- It is not sturdy enough
- Thrust ratio is fairly standard
Conclusion
These are the best caulking guns in the market. Some of us may require a caulking gun to use it regularly while some may use it very rarely. Some may go for a pneumatic gun or a manual one. It totally depends on individual to individual and their needs and requirement of a caulking gun. Some important features that you would want to look for in a caulking gun are lightweight, dripless, and the pressure ratio. Please do let us know which one you liked the best in the below comment section.
Leave a Reply