Do you want to learn how to remove wheel locks without a key tool? You probably have installed new, shining rims on your car. They’re admirable, aren’t they? They’re attention pickers that make people stare and say, “I want those for my car, too.” However, even thieves love them, so you need to protect them! Otherwise, you will lose your investment. Consider following this guide and protect your dashing rims now.
How to Remove Wheel Locks without a Key Tool
Parking anywhere, thieves can remove the wheels with a floor jack or a lug nut wrench. It shouldn’t happen! In a short time, they can run away with your tires and wheels – and your money. Prevent it from happening with locking lug nuts or wheel locks.
On each wheel, install a wheel stud or lug nut replacing one of the studs or wheel nuts. Know that these wheel studs only fit their key due to an irregular shape. You must remove them using their wheel lock key. Otherwise, you won’t be able to take them out with a standard lug nut wrench or socket wrench. Don’t despair if they’re lost or broken! Here’s how to remove the wheel locks without a key tool easily.
Removing a wheel lock without a key
- Get a screwdriver or a punch, a rubber mallet, lug nut wrench and wheel lock removal kit. Keep looking for the wheel lock key before trying this method.
- Apply the parking brake in your car. It will help prevent a rolling motion when loosening the lock.
- Look for a wheel lock removal tool. However, you must test-fit it over the lock that you want to take out. Check if the removal tool fits tightly. Its teeth should bite into the wheel lock.
- Start hitting the universal removal tool with a rubber mallet. Do it firmly at the tool’s end. Make sure the removal tool is stuck on your wheel lock. The teeth should be digging into the lock itself.
- Begin loosening the wheel lock by turning the removal tool left using a lug nut wrench. Be patient. It takes enormous effort to loosen it.
- Complete the turning and loosen the wheel lock.
- Take the wheel lock out the removal tool. Use a screwdriver or punch through the wheel lock tool’s hole against the lock of the wheel, and then hit the punch using the mallet.
- By this time, the damaged wheel lock must be able to pop out after a few hits. In some cases, the lug nut must be held by a vise while the removal tool is being turned clockwise to get the lug nut out of the wheel lock tool.
- Upon successful removal of the wheel lock without the key, you must do the same for the remaining wheel locks, as needed.
- If installing new wheel locks, do not misplace the key. Put it in a place where you can easily find it. Keep it in a center console, glove box or with the tire jack.
- If replacing wheel bearings or tightening the lug nuts, get help from a technician.
Removing wheel locks with a wheel lock key
Now, let’s have another useful method – how to remove the wheel locks with a wheel lock key. It may come in handy when removing the wheel locks for the first time.
- Get your wheel lock key and lug nut wrench ready. Take note: Don’t use power tools to take the wheel lock. They put in too much force enough to strip or damage the wheel lock.
- Apply the parking brake to prevent a rolling motion and for added security.
- Begin the process by aligning the key with the nut, and then lining up the splines on the wheel lock on the wheel and the wheel lock key.
- On the wheel lock, place the wheel lock key, and then start turning slowly until the design lines or tabs are aligned. Then, the wheel lock must be able to drop the wheel lock.
- Put the lug nut on the key. Start turning the wrench counterclockwise to loosen the lock. Be patient as well. You need force to loosen the lock on the wheel.
- Turn the lock off with your hand.
- If you need to place the wheel locks again, you can reverse this procedure.
Refer to this guide on how to remove wheel locks without a key tool and complete the task easier. Final tip: Make sure to read the maker instructions on the wheel locks you’re installing. They may have additional reminders for you. Did you like this post? Share it on social media today!